RetroTINK firmware 1.99.19 adds several display features and fixes for the RetroTINK 6X and 4K families. The headline addition for the 6X CE and 4K CE is Edge Adaptive Deinterlacing, previously limited to the 4K Pro.
The update also introduces an option to extend the bezel effect to fill a 16:9 screen. Custom modeline profiles should now load the correct mode more reliably when used across 6X and 4K units.
Extended bezel fills the side bars
The new Extended Bezel setting fills the screen’s side bars with a soft reflection of the picture. It can be used with any bezel setting, including “No Bezel,” and the reflection amount is adjustable.
To try it, open Advanced Settings > Advanced CRT Effects, enable a bezel option, then go to Bezel Details and switch Extend Bezel on. Adjust Bezel Reflection to taste.
Edge Adaptive Deinterlacing reaches CE models
Edge Adaptive Deinterlacing is now available on both the 6X CE and 4K CE. The CE models do not run the same algorithm as the 4K Pro, but the update is described as a noticeable improvement for 480i content.
Find the setting under Advanced Settings > Deinterlacer/Film. Choose Motion Adaptive, then select either Edge Adaptive or Wide Edge Adaptive, which offers a stronger effect.

Existing 4K Pro profiles with Edge Adaptive enabled will also enable the feature on CE models. Updated VHS capture profiles include 1080p and 1440p NTSC options for the 6X CE. The firmware further improves how custom modelines load between 6X and 4K devices.
Other fixes and changes
Firmware 1.99.19 includes a range of refinements to bezel effects, CRT options, sampling and signal handling:
• Improved sampling quality for most curvature modes, plus better corner mitres with reflections.
• Updated the PVM bezel reflection and kept bezel size consistent when a game changes resolution.
• Corner Dimming now works with CRT Beam (Rolling) and Variable MPRT BFI.
• Fixed a CRT FX lighting issue that could freeze the device.
• On the 6X CE and 4K CE, lines wider than the output now scale down automatically instead of changing the output mode.
• Fixed 480p custom profiles and added CP 15kHz and SDP 15kHz options to Smooth I/P.
• Fixed the “Check Sample Rate” flash when rotation is enabled and improved composite/S-Video relocking after signal loss.
For 6X CE and 4K CE owners, the key upgrade is Edge Adaptive Deinterlacing—now available beyond the 4K Pro.
Source: RetroRGB




